Pet Equipment – Index
2 – Stage Equipment (from Pre-Forms)
Semi-Automatics (2 machines per system)
| 1. | 5 Gallon Model 27 Pet-All | (1 US Gallon semi-automatic) |
| 2. | 10 Liter Model 10 Pet-All PLC | (10L one cavity, 2L two cavity semi-automatic) |
| 3. | 7 Liter Model 7 Pet-All PLC | (7L one cavity, 2L two cavity semi-automatic) |
| 4. | 3 Liter Model 3 Pet-All PLC | (3L one cavity, 2L two cavity semi-automatic) |
| 5. | Pet-All WM Preheater | (For Wide Mouth Containers) |
Pet All Manufacturing Inc. Pet Program
Pet Reheat Stretch Biaxial Machinery: 2 Stage From Pre-Forms
Semi-Automatic Equipment (4 sizes available)
Features:
Pet All`s semi-automatic PET blow molders have exceptional features, as follows:
- Full safety protection shield (retracting) on blow molder
- Mold adjustment device be separate motor
- FESTO pneumatics, Omron PLC and controls, automatic lubrication system
Several models are available. In all cases 2 machines are necessary. One to heat the pre-form and one to blow the PET pre-form into a finished container. Full support equipment available for a complete plant.
1. 5 Gallon Model 27 Pet-All (1 US Gallon to 5+ US Gallon)
- Volume in liters of product 1 US Gallon up to 27 Litres (3.8 to 27L)
- Output To 100 per hour
- Neck of product To 100 mm (Max)
- Mold platen 420x640 mm
- Mold Thickness 400 mm
- Mold stroke 330 mm
- Clamp force 100KN
- Operator Protection shield (retracting) on blow molder
Blow Molder: 2.75 x 0.68 x 2.1 meters (size). Weight 2100 kgs.
Pre-heater: 2.2 x 0.75 x 1.9 meters (size). Weight 560 kgs.
On request, will be supplied with all ancillary equipment:
- PLC controlled equipment
- Volume of product size To 10 Liter
- Output To 350 per hour
- Neck of Product To 75 mm (max)
- Mold platen 360 x 500 mm
- Mold thickness 300 mm (max) 170 mm (min)
- Mold stroke 230 mm
- Clamp force 80 KN
- Operator Protection shield (retracting) on blow molder.
Blow Molder: 1.6 x 0.58 x 1.8 meters (size). Weight 800 kgs.
Pre-heater: 1.5 x 0.7 x 1.35 meters (size). Weight 380 kgs.
2. 10 Liter Model 10 Pet-All PLC (10 Liter in 1 cavity)
- PLC controlled equipment
- Volume of product size To 10 Liter
- Output To 350 per hour
- Neck of Product To 75 mm (max)
- Mold platen 360 x 500 mm
- Mold thickness 300 mm (max) 170 mm (min)
- Mold stroke 230 mm
- Clamp force 80 KN
- Operator Protection shield (retracting) on blow molder.
Blow Molder: 1.6 x 0.58 x 1.8 meters (size). Weight 800 kgs.
Pre-heater: 1.5 x 0.7 x 1.35 meters (size). Weight 380 kgs.
Ancillary Equipment
Full set available: High / Low Compressors (2), Air Filter (1), Voltage Regulator (1)
3. 7 Liter Model 7 Pet-All PLC (7 Liter in 1 cavity, 2 Liter in 2 cavity)
- PLC controlled equipment
- Volume of product size To 7 Liter (1 cavity) 2 Liter (2 cavity)
- Output 350 per hour 7L, 840 per hour 2L (max)
- Neck of product To 75 mm
- Mold thickness 280 mm (max) 170 mm (min)
- Mold Stroke 210 mm
- Clamp force 80 KN
- Operator Protection Shield (retracting) on blow molder.
Blow Molder: 1.83 x 0.58 x 1.8 meters (size). Weight 800 kgs.
Pre-heater: 1.5 x 0.7 x 1.4 meters (size). Weight 380 kgs.
Ancillary Equipment Full set available: High/Low Compressors (2), Air Filter (1), Voltage Regulator (1)
4. 3 Liter Model 3 Pet-All PLC (3 Liter in 1 cavity, 2 Liter in 2 cavity)
- PLC controlled equipment
- Volume of product size 3 Liter in 1 cavity, 2 Liter in 2 cavity
- Output 350 per hour 3L, 840 per hour 2L
- Neck of product To 75 mm
- Mold platen 360 x 500 mm
- Mold Thickness 200 mm (max) 120 mm (min)
- Mold stroke 140 mm
- Clamp force 60 KN
- Operator Protection Shield (retracting) on blow molder
Blow Molder: 1.53 x 0.58 x 1.75 meters (size). Weight 690 kgs.
Pre-heater: 1.35 x 0.5 x 1.2 meters (size). Weight 280 kgs
Ancillary Equipment Full set available: High/Low Compressors (2), Air Filter (1), Voltage Regulator (1)
5. Pet-All Wide Mouth Preheater
Special for Wide Necks (Wide Mouth Containers)
A special preheater is available for wide mouth containers, with 12 rotation device widely spaced.
Pet All Manufacturing Inc. is a manufacturer and supplier of pet blow molding molding machines in North America, Latin America, and Europe.