This is the most popular range of Injection blow molding machine because all hydraulics are situated beneath the mold in the base of the machine. The Injection Blow Molding Machinery system is fool proof and does not allow oil from the hydraulics to contaminate the mold or the finished product. The machine has the added advantage of using a pull down tiebar system which is excellent for large cavitations used in the 135 Ton and 189 Ton range. The alternative is hydraulics above the mold where leaking may occur, thus contaminating the mold area. Furthermore, applying pressure more to the center of the mold than the pull down outside tiebars often inhibits the complete formation of the outer molds because of flexing. Large machines of the non-inverted head type, also are susceptible to frame cracking because of the flexing. A full range of machines is available > From 57 Ton to 220 Ton.
Not only are the injection blow molding machines available, but also Injection blow molding machine tooling to offer a full technical service. The equipment has been specially designed for Pet All Manufacturing Inc., and all machines for the North American market are tested and approved at our engineering centre before release to customers.
The Can Mold Inverted Head (upside down hydraulics) brand machines have the following outstanding features:
Please see the chart below of Injection blow molding Machinery product sizing of bottles for each size of body/diameter etc. These are good estimates only.
Product Size | IBM 250/450 60 Ton |
IBM 300/700 88 Ton |
IBM 700/1200 135 Ton |
|||
Volume | Neck Dia | Height | Body Dia | Cavities | Cavities | Cavities |
5ml | 10 | 35 | 15 | 14 | 22 | 30 |
10ml | 12 | 40 | 20 | 12 | 20 | 30 |
20ml | 15 | 50 | 25 | 10 | 18 | 28 |
30ml | 20 | 60 | 30 | 9 | 16 | 26 |
40ml | 22 | 65 | 35 | 8 | 14 | 24 |
60ml | 28 | 75 | 40 | 8 | 13 | 22 |
80ml | 30 | 80 | 45 | 7 | 12 | 20 |
100ml | 32 | 85 | 50 | 6 | 12 | 20 |
150ml | 35 | 90 | 53 | 5 | 10 | 18 |
200ml | 38 | 100 | 58 | 4 | 8 | 16 |
400ml | 42 | 120 | 65 | 3 | 6 | 12 |
650ml | 50 | 160 | 80 | 2 | 5 | 10 |
1000ml | 40 | 200 | 90 | 4 | 8 | |
1500ml | 45 | 200 | 103 | 3 | 6 |
For more than 15 years Pet All has been an injection blow molding machine manufacturer offering a wide range of plastic molding machines in the US market.
The same range of machines is available in hybrid electric, with the screw being full electric and the main motor being servo assisted..
Full Electric Inverted Head RangeAvailable in the same range of machines as Injection blow molding machine Inverted Head above.
More than 30% energy saving and up to 15% faster cycle times than full hydraulic systems.
Low Pollution and no noise.
The fully electric is driven totally by B & R controller and B & R Servo Motors (all made in Austria).
Servo Motors (all models)
There are 10:
The same range of machines is also available in full electric.
Hybrid Electric Inverted Head RangeElectric screw drive and servo assisted main motor.
More than 15% energy saving over full hydraulic systems.
Jomar and Uniloy have Hybrid - Electric at greatly inflated prices. Thruput is faster than the hydraulics, by 1-2 seconds. Prices are available on request, not that much more expensive.
Servo Motors (all models)
There are 3 :
Process: Injection Blow Molding
Recommendation for PetAll Injection Blow Machines
Mike,
Please use this email as my recommendation for the PetAll Can Mold Injection Blow Molding machines.
My experience with these machines has been nothing short of exceptional. Below is a summary of my
experience with PetAll and your Can Mold machines.
1. In my role as VP Business Unit Manager of O-I Health Care Packaging my team of engineers
conducted a side by side comparison of your Can Mold IBM machines to the industry standard Uniloy and
Jomar machines. In all tests the Can Mold machines performed as good as or better in process reliability,
dependability and durability. As a bonus capability the cost for these Can Mold machines is significantly
less than the industry standard machines.
2. In my role as President of Priority Plastics we installed 9 of the PetAll Can Mold machines and the
machines performed at the same exceptional level as the machines did when tested and run at O-I.
3. In my 25+ years’ experience in working with PetAll I have nothing but praise for the quality of your
equipment, service levels and most importantly high level of integrity. You have always delivered what
you said you would and if ever a problem arose you were first in line to address and correct the problem,
regardless of whose fault it was.
Please keep in mind that the IBM process is still a process and engineers as well as the operators must
be capable. The staffs at O-I and Priority (while I was in the leadership role) were considered industry
leaders in their fields so our experience with the PetAll Can Mold machines was exceptional. One can
take an exceptional machine with poor operators and achieve poor results. So if anyone in the industry
does not share my evaluation and experience with the PetAll Can Mold machines I would look at the
operator and management capabilities of the company and NOT the machines.
Please feel free to use this recommendation as you see fit. I stand behind my evaluation (and a team of
industry experts) and the many months of gathering engineering and performance data on your machines
and the process capabilities of your machines.
Sincerely,
William P Negrini
Former OI Health Care Packaging VP Business Unit Manager
I will recommend PetAll to anyone who want molding machine for their company. I have a plastic molding business, I wanted to expand my business so I wanted a new machine, so I called them for inquiring for new machine, they told me each and every specification of the latest machine and how does it works. They are really professional.
I am very impressed with this company. I bought blow molding machines for my business. The equipments were affordable. I recommend this company to everyone in the plastic business.
We found Pet All team very supportive & accommodative. We contacted them for the Plastic Bottle Molding machine service which we found really helpful for our industry. We are thankful for their service.
Excellent supply source for my PET equipment.
Great supplier, right location.
PRIMARY CONTACT
CONTACT US
ADDRESS:
85 Royal Crest Court Markham, L3R 9X5, Ontario, Canada
TELEPHONE: 905-305-1797
FAX: 905-305-0013
E-MAIL: obrandau@petallmfg.com
Minnesota Location:
620 Minnie Street, Paynesville, MN
56362, USA
TELEPHONE: 86-1360-808-8755
E-MAIL: tian@petallmfg.com
Have a quick enquiry? Get in touch with us by filling in your details below and we will contact you shortly.